News

Home>News

Feb 19, 2020

CHINA AUTOMOTIVE SUPPLIER QUALITY MANAGEMENT BRIEFING No. 36



CHINA AUTOMOTIVE SUPPLIER

QUALITY MANAGEMENT BRIEFING


Vol. 4, No. 2, February 2020







1





How to avoid or reduce quality risks with the purchasing of lower-priced auto spare parts (II)

When international buyers try to work with suppliers who are offering lower prices, there are things the buyers should carefully watch for. Using the product of ratchet tie-down as an example, Shentou recommends the following issues for considerations based on its 20-year plus experience in supplier qualification and selection.

Checking the sellers’ qualifications and product certification documents

When overseas buyers go to inspect and audit Chinese factories, they’d usually pay attention to the qualifications of the factories such as business licenses, quality system certifications (e.g. IATF16949 or ISO9001) and their validity periods. When the factory produces products such as ratchet tie-down which requires additional product certifications, experienced buyers would ask for such documents, but most inexperienced buyers would probably never realize these requirements and instead just focus on product prices and the appearance of the factories. 

Currently all binding belts being exported to Europe are certified by the German TUV certification agencies in China. GS certificates with validity periods will be issued after the products pass certifications. Every year, the factories that have obtained the GS certifications must also accept factory audits by the TUV certification agencies. After the factories pass the audits, the validities of the GS certificates will be extended into the next cycle. Therefore, when checking the GS certificates, the validity dates of the GS certificates shallot be ignored.

Risk warnings:

A. Are the certified models marked on the GS certificates corresponding to the products being delivered?

B. Are the validity periods of the certificates still valid?


Verifying the production standards of the products

Generally, there are two production standards for binding belts being produced in China: En12195-2 standard which is applied to binding belts that are exported to the European regions and countries, and WSTDA-T-1 which is used for belts exported to the U.S. Therefore, we need to understand whether the supplier's quotations are based on the European standard or the American standard depending on the market requirement. 

With more than 20-year experience in the European auto spare parts markets, Shentou has a comprehensive and thorough understanding of the European standards. We believe that the following three specifications among the many requirements must be met: breaking strength, extension webbing and Breaking strength webbing.

Risk warnings:

A. Are the applicable standards included in the supplier's external documents?

B. Have the on-site operation instructions adopted the requirements of the standards?


(To be continued)


By Felix SS YUAN


2





Exhaust Manifold

The exhaust manifold is connected with the engine cylinder block, which collects the exhaust gas from multiple cylinders and delivers it into the exhaust manifold with different pipes. The main requirements for the exhaust manifolds are that the exhaust resistance should be minimized, and the mutual inference between the cylinders be avoided. At present, most exhaust manifolds can be divided into two types in terms of materials and processing technologies: Cast Iron Exhaust Manifold and Cast Steel Exhaust Manifold.


Primary failure mode: 

Leakage & fracture

Main causes: 

Unqualified materials, casting defects, improper selection of process parameters, improper processing etc.

Key finished product inspection items:

Chemical composition, mechanical performance, metallographic structure, installation size, physical appearance, and packing.



By QP LIU


3





GS Mark & Certification

The GS mark stands for Geprüfte Sicherheit (“tested safety” in German). This is a voluntary certification mark applied to finished products that signifies their compliance with all the statutory requirements of the German Product Safety Act. 

The GS mark covers essential product characteristics and also an evaluation of a manufacturer’s production. The products bearing the GS mark are tested and evaluated by organizations that are accredited for GS mark testing and certification. 

Although the GS mark was designed with the German market in mind, it appears on many other products sold elsewhere in the world. Applying a GS mark to a product reassures safety-conscious consumers and quickly demonstrates its compliance to Germany’s regulators.




4





Cost of raw materials:

Exchange rates:

USD/RMB: 1:6.9464



EUR/RMB: 1:7.6372



RUB/RMB: 1:0.1097




February 2020



The above information is for reference only


5





By now the crisis of novel coronavirus COVID-19 in China has shown signs of stabilization, although the next couple of weeks are still critical in the fight against the virus. 

While the current normal production and delivery of orders have been disrupted, we’d like to remind international buyers that, once the virus situation gets better and factories in China resume the normal operations, there will be a situation where factories would be “jammed” with order productions. This would create further disruptions to customers who are already running low on inventories. 

We are confident that the virus situation will be contained and things will gradually get back to normal. Therefore, it is advisable for the international buyers to evaluate the order requirements of the next couple of months and place orders with the Chinese suppliers as early as possible, so that the orders would be processed by the factories with high priority once the situation normalizes.






SHENTOU SUPPLY CHAIN MANAGEMENT CO. LTD. is a Shenzhen, China, based company serving international automotive clients in the implementation of their China strategies and programs. CHINA AUTOMOTIVE SUPPLIER QUALITY MANAGEMENT BRIEFING is a monthly newsletter published by Shentou to address the specific and unique quality challenges and concerns international automotive companies face with suppliers in China.  Comments are welcome at qms@shentou.com. Click here to subscribe.



Copyright © 2020 Shenzhen Shentou Supply Chain Management Co., Ltd.

All Rights Reserved.








<<Back

Welcome to 24 hours to inquire

GD ICP No. 11062269 Technical Support : Darkeye AD design© 2015 OE PARTS Copyright Technical Support : Darkeye AD